Anderson Island, WA Mold Damage Remediation

Your Anderson Island home or commercial property can quickly become infested with mold if a source of water is present. Mold can spread throughout a property in as little as 48 hours. Since mold can produce allergens and irritants, you should call us to inspect your home if you suspect you have a mold problem. If mold is found, we have the training, equipment, and expertise to remediate your mold infestation.

Learn more about mold and what to do until help arrives by reviewing these mold damage tips.

SERVPRO of University Place / Lakewood West

If You See Signs of Mold, Call Us Today – (253) 564-1494

Understanding Mold

Some restoration companies advertise “mold removal” and may even guarantee to remove all mold. This is a fallacy because it’s impossible to remove all mold from a house or business; microscopic mold spores exist almost everywhere, both indoors and outdoors. Here are the facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Disaster

Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Locally Owned, with National Resources

We are proud to be an active member of this community. SERVPRO of University Place / Lakewood West is locally owned and operated, so we’re already nearby and ready to help Anderson Island residents and business owners with any size mold contamination.

We are proud to serve our local communities:

Highly Trained Water and Mold Restoration Specialists

We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.  Learn about our water damage training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (253) 564-1494

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mold Damage Assessment

We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.

Step 3: Mold Containment

To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Anderson Island, WA home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.

Step 5: Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mold

Here at SERVPRO of University Place / Lakewood West we understand what it takes to properly remediate a mold situation in Anderson Island, WA. Encountering mold can be worrisome for any homeowner, but SERVPRO is here to put your mind at ease. We have the right tools and trained professionals to get the job done right. Give us a call at (253) 564-1494 and we will be on our way to help.